M1: Kinematic Transformation; Brief Description; Transmit (Option) - Siemens SINUMERIK Series Function Manual

M1: Kinematic transformation

6.1

Brief description

6.1.1

TRANSMIT (option)

Note
The "TRANSMIT and peripheral surface transformation" option that is under license is
required for the "TRANSMIT" function.
The "TRANSMIT" function permits the following services:
● Face-end machining on turned parts in the turning clamp
● A cartesian coordinate system can be used to program these machining operations.
● The control maps the programmed traversing movements of the Cartesian coordinate
● A tool center offset relative to the turning center is permitted.
● The velocity control makes allowance for the limits defined for rotary motion.
● A path in the cartesian coordinate system must not pass through the turning center point
Other system variables
● The tool center point path can pass through the turning center point of the rotary axis.
● The rotary axis does not need to be a modulo axis.
Extended Functions
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
– Holes
– Contours
system onto the traversing movements of the real machine axes (standard situation):
– Rotary axis (1)
– Infeed axis vertical to the axis of rotation (2)
– Longitudinal axis parallel to the axis of rotation (3)
Linear axes (2) and (3) are perpendicular to one another.
(this restriction applies to SW 2 and 3).
6
347