Siemens SINUMERIK Series Function Manual page 565

Extended functions

Hide thumbs Also See for SINUMERIK Series:

Table of Contents

Programming example:

Program code

N100 Y30 SPOF

N110 Y100 PON

Punching ON (in position control cycle)

Punching with delay ON

The delay time in seconds is programmed in setting data:

SD42400 $SC_PUNCH_DWELLTIME

If the defined value cannot be divided as an integer into the interpolation clock cycle, then it

is rounded to the next divisible integer value.

The function has a modal action.

Punching with delay OFF

Programming example:

high-speed I/Os (see Section "Channelspecific machine data (Page 596)", MD26004 and

Program code

N170 PDELAYON X100 SPOF

Extended Functions

Function Manual, 03/2013, 6FC5397-1BP40-3BA1

behaves in the same way as

is a preparatory function. This means that

. The punch stroke is output with a delay when the programmed end position is reached.

deactivates punching with delay function, i.e. the punching process continues

activates the second punch interface, i.e. the stroke is controlled via the second pair of

; position without punch initiation

; Activate punching, punch initiation at the end of the

; positioning operation (Y=100)

. For explanation, please refer to

form a G code group.

; Position without punch initiation, activate

; the delayed punch initiation

N4: Own channel - only 840D sl

9.3 Activation and deactivation

is generally programmed before

Sinumerik 840d sl Sinumerik 828d