Supplementary Conditions; Tool Changes With Online Tool Offset - Siemens SINUMERIK Series Function Manual

Programming
Program code
N20
N25
N30
...
N40
N45
...
N50
N55
...
N60
N65
...
For more information, see Section "P5: Oscillation - only 840D sl (Page 641)".
Supplementary references
● Function Manual, Basic Functions; Feedrates (V1)
● Function Manual, Synchronized Actions
17.6

Supplementary Conditions

17.6.1

Tool changes with online tool offset

Tool change
Tool changes with
Extended Functions
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
T1 D1
S1=1000 M1=3
S2=1500 M2=3
GWPSON
S[$P_AGT[1]]=60
GWPSON(5)
S[$TC_TPG1[5]]=40
GWPSOF
GWPSOF(5)
cannot be executed in conjunction with the online tool offset function.
M6
W4: Grinding-specific tool offset and tool monitoring
Comment
; Select T1 and D1
; 1000 rpm for spindle 1
; 1500 rpm for spindle 2
; ;Selection of GWPS for active tool T1
; Set GWPS to 60 m/s for active tool
n=1909.85 rpm
; GWPS selection for tool 5 (2nd spindle)
; Set GWPS to 40 m/s for spindle 2
n=1909.85 rpm
; Deactivate GWPS for active tool
; Switch off GWPS for tool 5 (spindle 2)
17.6 Supplementary Conditions
833