Cleaning; Safety Sign (Decal) Installation; Procedure - Farm King HS8525 Operator And Parts Manual

CLEANING

Fully Clean the equipment EVERY 50 HOURS:
Keep the equipment free of any debris.

SAFETY SIGN (DECAL) INSTALLATION

Procedure

When replacing safety
temperature must be above 10° C (50° F).
• Remove all portions of the damaged safety sign
(decal).
• Thoroughly clean the area with glass cleaner.
Remove all adhesive residue.
• Allow the area to dry completely before installing the
new safety sign (decal).
• Position the safety sign (decal) in the correct location.
Remove a small portion of the backing paper on the
safety sign (decal).
• Press on the safety sign (decal) where the backing
paper has been removed.
• Slowly remove the remaining backing paper, pressing
on the safety sign (decal) as the backing paper is
removed.
• Using the backing paper, pressing firmly, move the
backing paper over the entire safety sign (decal) area.
NOTE: Small air pockets can be pierced with a pin
and smoothed out using the piece of the
backing paper.
signs (decals), the
Maintenance - High Speed Compact Disc
99