Farm King HS8525 Operator And Parts Manual page 44

Figure 53
The LH rear disc arm (1, Figure 53) has three slots (2)
and is the only disc blade arm that will have slots.
NOTE: The LH rear disc blade arm with slots must be
located on the outer rear of the LH wing blade
mounting tube.
Figure 54
2
Rear disc arm (1, Figure 54) and front disc arm (2).
44
1
2
B-17057
1
B-17056
Assembly - High Speed Compact Disc
Figure 55
FRONT
1. Raise the disc blade arm (1, Figure 55) with slots up
to the mounting tube and install two rubber inserts (2)
as shown.
Figure 56
3
B-17051
2. Place the disc arm mounting bracket (1, Figure 56)
and two rubber inserts (2) as shown.
3. Install four 5/8" x 2-3/4" bolts (3) through the mount
bracket down through the disc arm.
4. Install four 5/8" lock washers (4) and 5/8" nuts (5) on
each bolt. Do Not tighten bolts at this time.
Repeat procedures Figure 55 and Figure 56 for all disc
arms.
REAR
2
1
B-17064
1
2
4
5
1