Farm King HS8525 Operator And Parts Manual page 52

Figure 83
2
B-17114
14. Reinstall the bearing / arm assembly (1, Figure 83)
aligning the cage roller shaft into the bearing and
aligning the cage roller arm (2).
15. Reinstall the 3/4" x 3" bolts (3), lock washers and
nuts. Tighten bolts.
Figure 84
1
2
16. Install the washer (1, Figure 84) and 1/2" x 1" bolt (2)
(both sides).
52
3
1
2
1
B-17077
Figure 85
1
2
1. With a strap and proper lifting device attached to the
cage roller, raise the cage roller and align with the rod
end of the hydraulic cylinder.
2. Install the 1-1/4" x 7-3/8" cylinder pin (1, Figure 85)
and cotter pin (2).
Repeat Figure 70 through Figure 85 for the two
remaining cage rollers.
Assembly - High Speed Compact Disc
2
B-17137