Installing Rear Blade Mounting Tubes - Farm King HS8525 Operator And Parts Manual

Figure 47
1
1. Align the wheel (1, Figure 47) with the hub / spindle
assembly, with the valve stem (2) facing outward.
2. Install ten 3/4" flange nuts (3).
3. Tighten wheel nuts in a criss-cross pattern to the
correct torque (see Wheel Bolt Torque on page 158).
Repeat procedure for the opposite side.

Installing Rear Blade Mounting Tubes

Figure 48
1
TOP VIEW
3
3
1. Attach straps and / or proper lifting device to the
center frame rear tube (1, [Figure 48]).
2. Position the center frame rear tube under rear of the
center frame (2).
42
2
B-17102
2
4 5
1
B-17049
3. Raise the center frame rear tube up and align the
mounting holes to the center frame mount holes.
4. Install three 3/4" x 2-1/2" bolts (3) down through the
center frame mount. Install 3/4" flat washers (4) and
3/4" flange nuts (5) on the bolts. Do not tighten at this
time.
Figure 49
3
Blade 20
Blade 22
Blade 24
Blade 26
5. Adjust the center frame rear tube (1, Figure 49) per
dimensions and tighten the three bolts (2).
Assembly - High Speed Compact Disc
2
"
4-3/8 in
"
3-3/8 in
"
2-5/8 in
"
7/8 in
1
B-17050A