Farm King HS8525 Operator And Parts Manual page 35

Figure 21
1
1
4
5. Raise the hitch frame and align the hitch frame holes
with the holes on the center frame.
6. Install washers (1, Figure 21) (as required) between
the center frame mount (2) and the RH hitch frame
mount (3) while inserting the mounting pin (4).
NOTE: Install washers as evenly as possible on both
sides of the hitch frame mount.
Figure 22
4
3
2
3
7. Align the mounting pin (1, Figure 22) with the hole on
the wing frame.
8. Install the bushing (2), spacer (3) and 5/8" x 2" bolt (4)
through the mounting pin.
4
2
3
B-17010A
1
2
B-17010
Assembly - High Speed Compact Disc
Figure 23
1
9. Install the 5/8" lock nut on the 5/8" x 2" bolt (1, Figure
23) and tighten.
10. Install washers (2) (as required) between the wing
and bolt hole.
11. Install the 3/8" x 4" bolt (3) through the pin. Install the
3/8" lock nut and tighten.
Repeat Figure 21 through Figure 23 procedures for the
LH hitch frame mount.
Figure 24
2
12. Place a support stand (1, Figure 24) under the hitch
frame (2).
13. Lower the hitch frame onto the support stand and
remove straps.
2
3
B-17023A
1
B-17013
35