Installing The Depth Stops - Farm King HS8525 Operator And Parts Manual

Figure 109
1. Place the hose bracket (1, Figure 109) as shown over
the mounting brackets on the hitch frame. Install two
1/2" x 1-1/2" bolts (2) 1/2" lock washers and 1/2" nuts
on each side.
2. Tighten bolts.
Figure 110
INSIDE
VIEW
2
4
1
1. Place the bracket (1, Figure 110) as shown on the
inside front of the hose holder (2). Align the four bolt
holes.
2. Install four bolts, nuts (3) and tighten.
3. Install the hose sleeve (4) around the hydraulic hoses
and route hoses over the top of the hose bracket
through the front of the hose holder.
1
2
B-17040
OUTSIDE
VIEW
2
3
1
B-17044
Assembly - High Speed Compact Disc
Figure 111
1. Install a 1/2" nut (1, Figure 111) onto each side of the
u-bolt (2), thread the nuts fully onto the u-bolt.
2. Install the u-bolt onto the bracket, install 1/2" nuts and
tighten.

Installing The Depth Stops

Figure 112
3
4
1
1. Place twenty-two depth stop plates (1, Figure 112)
together and install a 1/2" x 7" bolt and spacer tube (2)
through the center hole on the depth stop plates.
Place the depth stop plates over the RH hitch frame
rockshaft cylinder rod.
2. Install the bolt through the center hole on the depth
stop plates and mount (3). Install a 1/2" lock nut (4)
and tighten.
2
1
B-17043
1
2
5
B-17123
59