3. Install the quick release pin (5) through the depth stop
plates and cylinder stop plate mount.
4. Repeat procedure for LH hitch frame rockshaft depth
stop plates and for the LH rear attachment depth stop
plates on the rear LH wing.
Hose Clamp Installation
Figure 113
1
2
1
1
1. Remove the bolts from the weld nut locations on the
inner LH hitch tube and discard bolts.
2. Place a poly hose holder clamp (1, Figure 113) on the
weld nut, place hydraulic hoses into the clamp.
3. Install the 2nd poly hose holder clamp on top of hoses
with cover plate. Install the 5/16" x 1-3/4" bolt and
tighten.
NOTE: Install P-clip (2) with additional hydraulic hose
on center cover plate.
60
Figure 114
1. Remove the bolt from the weld nut locations on the
inner LH hitch tube front side of lock-up valves and
discard bolts.
2. Place a poly hose holder clamp (1, Figure 114) on the
weld nut, place hydraulic hoses into the clamp.
B-17171
3. Install the 2nd poly hose holder clamp on top of hoses
with cover plate. Install the 5/16" x 1-3/4" bolt and
tighten.
NOTE: Install p-clip (2) with additional hydraulic hose
on center cover plate.
Assembly - High Speed Compact Disc
2
1
1
1
B-17168