Farm King HS8525 Operator And Parts Manual page 50

Figure 75
1. Apply a light coat of ant-seize to the shaft on the cage
roller. Install the bearing (1, Figure 75) both sides.
Figure 76
VIEW LEFT SIDE
2
The cage roller must be installed so that the cage rotates
correctly.
View the cage roller from the right side. The rotation
arrows (1, Figure 76) must be going in a clockwise
rotation.
View the cage roller from the left side, the rotation arrows
(2) must be going in a counterclockwise rotation.
50
2
1
B-17113
VIEW RIGHT SIDE
1
B-17115
Assembly - High Speed Compact Disc
Figure 77
2
1. Install a strap and proper lifting device to the cage
roller (1, Figure 77).
2. Raise the cage roller and position the cage roller
between the mounts (2) both sides.
Figure 78
2
1
3
NOTE: The spacer (1, Figure 78) has a notch (2) that
must be aligned with the bearing tab (3).
3. Install two spacers (1) between the bearing and
mount arm.
4. Install four 1/2" x 2-3/4" bolts (4) and 1/2" nuts (5) and
tighten.
Repeat procedure on opposite side.
1
B-17114
4
5
1
1
B-17080