General Assembly Information; Component Unloading And Identification - Farm King HS8525 Operator And Parts Manual

GENERAL ASSEMBLY INFORMATION

NOTE: Use the following assembly information if the
equipment is not 100% assembled from the
factory.

Component Unloading And Identification

ELECTROCUTION HAZARD
To prevent serious
electrocution:
• Be aware of overhead power lines.
• Keep away from power lines when unloading and
assembling the equipment.
• Electrocution can occur without direct contact.
• DO NOT permit bystanders to be in the work area
when unloading and assembling the equipment
components.
• DO NOT work under suspended parts.
• Keep away from moving parts.
• Always use lifting devices / vehicles, chains or
straps of adequate size and strength when
unloading and
components.
injury or death
assembling the equipment
Unload the crate(s) and components on a flat level area
of adequate size to assemble the equipment.
Unload crate(s)
carefully to prevent damage to any of the
components.
NOTE: If any components are damaged, missing or
from replacement parts are required, contact your
Farm King Dealer.
Assemble the equipment in the following order:
Using the packing list, locate and place all
components and hardware in one area. Count the
individual components and verify that you have
received the correct number of components to fully
assemble the equipment.
1. Center Frame
2. LH and RH Wing Frame
3. Hitch Frame Assembly
4. Attachment Assembly
5. Hydraulics
Assembly - High Speed Compact Disc
and equipment components
31