Entering And Leaving The Operator's Position - Farm King HS8525 Operator And Parts Manual

Drawbar
NOTE: Tractor must be equipped with a clevis type
drawbar to pull the equipment.
Figure 136
Tractor drawbar must be a CAT 4 for the 25' and 30'
units and CAT 5 for the 35' and 40' units (Figure
136).

Entering And Leaving The Operator's Position

Follow the instructions in your tractor's operation
manual for the correct procedure.
Entering The Operator's Position
Move to the operator's position, start the engine and
release the parking brake.
B-17191
Leaving The Operator's Position
Before you leave the operator's position:
• Always park on a flat level surface.
• Place all controls in NEUTRAL.
• Engage the park brake.
• Stop the engine and remove the key.
• Wait for all moving parts to stop.
Park the tractor / equipment on a flat level surface.
Place all controls in neutral, engage the park brake,
stop the engine and wait for all moving parts to stop.
Leave the operator's position.
Operation - High Speed Compact Disc
AVOID INJURY OR DEATH
79