Figure 33
2
3. Raise the rod ends of the center frame fold cylinders
(1, Figure 33).
4. Place blocks (2, Figure 33) under the rod end of both
center frame fold cylinders.
5. Lower the cylinders and remove the strap.
Figure 34
1
NOTE: The LH and RH hitch frame rockshaft hydraulic
cylinders have a depth stop mount (1, Figure
34).
1. Install the base end of the 4" x 8" cylinder (2) onto the
frame mount (3).
2. Install the cylinder pin (4) and cotter pin.
Repeat procedure for the LH 4" x 8" hitch frame rockshaft
cylinder.
38
1
2
B-17034
3
1
4
2
B-17130
Assembly - High Speed Compact Disc
Installing The Hydraulic Jack, Wing Cradle and Hitch
Figure 35
3
2
1. Insert the base end of the cylinder (1, Figure 35) up
through the opening in the hitch frame as shown.
2. Install the cylinder pin (2) and cotter pin (3)
Figure 36
2
4
6
3. Install the jack stand link arm (1, Figure 36) as shown
to the hitch frame mount (2). Install pin and cotter pin
(3).
4. Install the rod end of the hydraulic cylinder (4) to the
link arm. Install pin and cotter pin (5).
5. Install the jack stand pad (6) to the link arm. Install pin
and cotter pin (7).
1
B-17047
3
1
5
7
B-17046