Figure 89
2
1. Install and tighten the six straight fittings (1, Figure
89) into the end of each valve (2).
2. Place the valves (2) between the brackets as shown
on the inner front left side of the hitch tube.
3. Install two 3/8" x 2-1/2" bolts (3) and 3/8" lock nuts (4)
and tighten.
Figure 90
6
4
NOTE: See pages 67 through 72 for correct hose
length installation.
1. Install and tighten the appropriate (red tie) hose (1,
Figure 90) (green tie) hose (2) and (blue tie) hose (3)
to the lock-up valves.
2. Route hoses (4, 5 and 6) to the appropriate locations
and tighten.
54
1
3
4
B-17144
3
5
2
1
B-17119
Assembly - High Speed Compact Disc
•
Center Frame Fold Circuit (Red Tie).
•
Rockshaft Lift Circuit (Green Tie).
•
Wing Fold Circuit (Blue Tie)
Figure 91
3
1. Route the hoses (1, Figure 91) through the hose
brackets (2) on the hitch frame to the manifold (3).
2. Connect the hoses to the appropriate locations and
tighten.
Figure 92
1
1. Install and tighten the appropriate hoses (1 and 2,
Figure 92) to the lock-up valve for the hydraulic jack.
2
2
1
B-17160
3
2
B-17118