Farm King HS8525 Operator And Parts Manual page 56

Figure 97
1
4
1
1. Install the 90° elbows (1, Figure 97) to the RH rear
wing attachment cylinder and tighten.
2. Install the 31026 kpa (4500 psi) check valve (2) onto
the 90° elbow at the rod end of the cylinder. Install the
hose (3) and secure with hose clamp (4).
3. Connect hoses (5 and 6) and tighten.
Figure 98
6
2
4
1. Install the 90° elbows (1, Figure 98) to the center rear
attachment cylinder and tighten.
2. Connect hoses (2 and 3) and tighten.
3. Install the 90° elbows (4) to the base end of the RH
wing fold cylinder and tighten.
4. Install the tee (5) to the base end of the LH wing fold
cylinder and tighten
56
2
5
3
6
B-17137
7
8
1
3
1
B-17131
5. Connect hoses (6, 7 and 8) and tighten.
Figure 99
1
6. Install the 90° elbow (1, Figure 99) on the rod end of
the RH wing fold cylinder and tighten.
7. Connect hose (2) and tighten.
Figure 100
5
8. Install the tee fitting (1, Figure 100) on the rod end of
the LH wing fold cylinder and tighten.
9. Connect hoses (2 and 3) and tighten.
Assembly - High Speed Compact Disc
2
2
3
B-17172
1
B-17167