Hitch Frame To Center Frame Assembly - Farm King HS8525 Operator And Parts Manual

Figure 17
3
1 2
6. Install the bushing (1, Figure 17) washer (2), 5/8" x 2"
bolt (3) through the mounting pin on the front and rear
mount.
Figure 18
1
3
7. Install the 5/8" lock nut (1, Figure 18) and tighten, on
the front and rear mount.
8. Install washers (2) (as required) between the wing
and bolt hole on the front and rear mount.
9. Install the 3/8" x 4" bolt (3), lock nut (4) and tighten, on
the front and rear mount.
10. Place support stands at the far end of the wing frame.
(See Figure 13).
11. Lower the wing frame onto the support stands and
remove straps.
34
1
2
B-17010
2
4
B-17011
Assembly - High Speed Compact Disc
Figure 19
1
FRONT
1. Connect straps to RH wing frame (1, Figure 19) and
to an approved lifting device.
2. Raise and move the RH wing frame to the RH side of
the center frame (2).
Repeat Figure 14 through Figure 18 procedures for the
RH wing frame.

Hitch Frame To Center Frame Assembly

Figure 20
2
3
1. Install straps on both ends of the hitch frame (1,
Figure 20). Connect the straps to approved lifting
devices.
2. Raise and move the hitch frame to the front of the
center frame (2).
3. Install a bushing (3) into the hitch frame mounting
hole (both sides).
4. Apply a coat of anti-seize to the inside of each
bushing.
FRONT
2
B-17008
3
1
B-17015