Hydraulic Lines
HIGH PRESSURE FLUID HAZARD
To prevent serious injury or death from high pressure
fluid:
•
Relieve pressure on system before repairing or
adjusting.
•
Wear proper hand and eye protection when
searching for leaks. Use wood or cardboard
instead of hands.
•
Keep all components in good repair.
•
Contain and dispose of any oil leakage in an
environmentally safe manner.
•
Thoroughly clean the quick couplers before
making connections. Dirt can quickly damage the
system.
NOTE: Make sure the quick couplers are fully
engaged. If the quick couplers do not fully
engage, check to see that the couplers are the
same size and type.
Operation - High Speed Compact Disc
To Connect:
Figure 141
1. Connect the hydraulic lines to the tractor (Figure
141).
•
Rockshaft Lift Circuit (Green Ties).
•
Center Frame Fold Circuit (Red Ties).
•
Wing Fold Circuit (Blue Ties).
•
Pressure Reliefs (Case Drain) (Purple Ties)
•
Hitch Jack (Yellow Ties)
To Disconnect:
AVOID BURNS
Hydraulic fluid, tubes, fittings and quick couplers can
get hot when running equipment. Be careful when
connecting and disconnecting quick couplers.
Pull on the hydraulic lines to disconnect.
B-17192
83