Initial Set-Up; Pintle Hitch Adjustment - Farm King HS8525 Operator And Parts Manual

INITIAL SET-UP

Pintle Hitch Adjustment

NOTE: Tractor must be equipped with a clevis type drawbar to pull the equipment.
With tractor parked on level ground, measure the distance between the ground and the top side of tractor drawbar.
Figure 137
25 - 30 FT MACHINE PINTLE POSITION
6°
386 mm
(15.2")
HEIGHT OF
GROUND
HOLE
PINTLE (CAT 4)
HEIGHT
FROM
PINTLE (CAT 5)
GROUND
Pintle location to match drawbar height with the following conditions: When equipment is in the
transport position and hitch is at a 6 degree angle on level ground.
HOLE
HEIGHT
PINTLE (CAT 5)
FROM
GROUND
Pintle location to match drawbar height with the following conditions: When equipment is in the
transport position and hitch is at a 6 degree angle on level ground.
Adjust the pintle hitch to the corresponding mounting holes per Figure 137 to match the measured drawbar height.
80
1ST
HOLE
386 mm
(15.2")
HEIGHT OF
HOLE PINTLE
25 - 30 FT MACHINE PINTLE POSITION
1ST 2ND
386 mm 444 mm
(15.2) (17.5)
386 mm 444 mm
(15.2) (17.5)
399 mm 455 mm
(15.7) (17.9)
35 FT - 40 FT MACHINE PINTLE POSITION
1ST
320 mm
(12.6)
330 mm
(13.0)
35 FT - 40 FT MACHINE PINTLE POSITION
6°
GROUND
3RD 4TH
500 mm 559 mm
(19.7) (22.0)
500 mm 559 mm
(19.7) (22.0)
513 mm 569 mm
(20.2) (22.0)
2ND 3RD
376 mm 434 mm
(14.8) (17.1)
388 mm 444 mm
(15.3) (17.5)
Operation - High Speed Compact Disc
320 mm
(12.6")
HEIGHT OF
HOLE
5TH 6TH
615 mm 673 mm
(24.2) (26.50)
615 mm 673 mm
(24.2) (26.50)
627 mm 683 mm
(24.7) (26.9)
4TH 5TH
490 mm 547 mm
(19.3) (21.6)
503 mm 559 mm
(19.8) (22.0)
1ST
HOLE
330 mm
(13")
HEIGHT OF
PINTLE
7TH
729 mm
(28.7)
729 mm
(28.7)
-
6TH
609 mm
(23.8)
617 mm
(24.3)