Rephasing Rockshaft Cylinders - Farm King HS8525 Operator And Parts Manual

Recommended operating speed is 13 - 19 kph (8 - 12
mph).
8. Move tractor and equipment forward, lower
equipment into the ground until the rockshaft
cylinders make contact with the stops and the
equipment reaches desired tilling depth.

Rephasing Rockshaft Cylinders

NOTE: Periodically, the hydraulic lift cylinders on wing
frame will not be synchronized with center
frame cylinders. This will cause uneven cutting
depth. If this happens, rephase the lift
cylinders.
Procedure
Fully lift the equipment completely out of the ground,
continue holding the tractor's control lever until all
rockshaft cylinders are fully extended.
90
Operation - High Speed Compact Disc