Farm King HS8525 Operator And Parts Manual page 51

Figure 79
5. Tighten the four bolts (1, Figure 79) both sides.
Figure 80
2
3
6. Slide the cage roller (1, Figure 80) all the way to the
one side.
7. Check the gap (2) between the bearing and the cage
roller. Check how many washers (3) fit in the gap.
Example: Eight washers fit in the gap, four washers will
be installed on each side.
1
B-17114
1
B-17080
Assembly - High Speed Compact Disc
Figure 81
2
B-17114
8. Install a strap and proper lifting device to the cage
roller (1, Figure 81).
9. Install a strap and proper lifting device to the cage
roller arm (2).
10. Remove the four bolts 3/4" x 3" bolts (3), nuts and lock
washers. Remove the cage roller arm.
Figure 82
2
11. Slide the cage roller (1, Figure 82) out from the
bearing / arm assembly on the opposite side.
12. Install the correct amount of washers (2) onto the
shaft (both sides of the cage roller).
13. Reinstall the cage roller into the bearing / arm
assembly.
3
1
1
B-17114
2
51