Farm King HS8525 Operator And Parts Manual page 33

Figure 13
FRONT
1. Connect straps to LH wing frame (1,Figure 13) and to
an approved lifting device.
2. Raise and move the LH wing frame to the left side of
the center frame.
Figure 14
3. Align the LH wing front and rear mounts (1, Figure 14)
with the center frame front and rear mounts (2) (rear
mount shown).
1
B-17004
2
1
B-17006
Assembly - High Speed Compact Disc
Figure 15
1
3 1 1 1
4. Install washers (1, Figure 15) (as required) between
the center frame mount (2) and the LH wing mount
while inserting the mounting pin (3) on the front and
rear mounts.
NOTE: Install washers as evenly as possible on both
sides of the center frame mount.
Figure 16
1
5. Align the mounting pin (1, Figure 16) with the hole on
the wing frame on the front and rear mounts.
2
1
3
B-17001B
B-17003
33