Farm King HS8525 Operator And Parts Manual page 37

Figure 29
1
REAR LH
NOTE: The LH attachment hydraulic cylinder with
depth stop mount (1, Figure 29).
1. Install the rear attachment 4" x 8" hydraulic cylinder
(2) (base end) to the cylinder mount (3) on the LH rear
of the LH wing frame.
2. Install the pin and cotter pin (4).
Figure 30
REAR
3
4
5
2
1. Install the hydraulic cylinder mount plate (1, Figure
30) to the mounting plate (2) on the RH wing frame.
2. Install six 1/2" x 2" bolts (3), 1/2" flat washers (4) and
1/2 lock nuts (5). Tighten bolts.
Repeat procedures for the hydraulic cylinder mount plate
on the LH wing frame.
2
3
4
WING
B-17106
FRONT
1
B-17018
Assembly - High Speed Compact Disc
Figure 31
FRONT
1. Install the wing rockshaft 3-1/2" x 8" hydraulic cylinder
(1, Figure 31) (base end) to the cylinder mount (2) on
the RH wing frame.
2. Install the pin and cotter pin (3).
Repeat procedures for the LH wing rockshaft hydraulic
cylinder.
Figure 32
5
1
NOTE: Cylinder ports must be facing to the inside.
1. Install straps and approved lifting device to the 6" x
38" RH center frame fold cylinder (1, Figure 32), raise
the cylinder and align the base end with the mount (2)
on the hitch frame.
2. Install the cylinder pin (3) and cotter pin (4).
Repeat procedure for the 6" x 38" LH center frame fold
cylinder (5).
2
3
1
B-17017
4
2
3
B-17033
37