Installing Hydraulic Cylinders - Farm King HS8525 Operator And Parts Manual

Installing Hydraulic Cylinders

Figure 25
1
1
If not already installed, hardened bushings (1, Figure 25)
must be installed at all cylinder mount holes on the center
frame and LH, RH wing frame.
Figure 26
1. Install the 5" x 38" RH wing hydraulic cylinder (1,
Figure 26) to the center frame (2).
2. Install the pin and cotter pin (3).
3. Place a support (4) under the cylinder.
Repeat procedures for the 5" x 38" LH wing hydraulic
cylinder.
36
1
B-17128
1
3
4
2
B-17012
Assembly - High Speed Compact Disc
Figure 27
2
3
1. Install the center attachment 3-1/2" x 8" hydraulic
cylinder (1, Figure 27) (base end) to the cylinder
mount at the rear of the center frame (2).
2. Install the pin and cotter pin (3).
Figure 28
REAR RH
1. Install the rear attachment 3" x 8" hydraulic cylinder
(1, Figure 28) (base end) to the cylinder mount (2) on
the RH rear of the RH wing frame.
2. Install the pin and cotter pin (3)
1
B-17016
2
1
3
WING
B-17017