Installing Hitch Frame Rockshaft Spindles And Wheels - Farm King HS8525 Operator And Parts Manual

Figure 43
3
4
2
TAB
1
1
8. At the rear of the rockshaft install the four smaller
bearing castings (1, Figure 43) onto the bearing
liners.
9. Install a 3/4" x 7" bolt (2) up through the bottom of the
bearing casting.
10. Install a 3/4" lock washer (3) and 3/4" nut (4) at the top
of each bearing mount.
Figure 44
2
1
11. Remove the four 3/4" x 7" bolts (1, Figure 44)
previously installed in the front bearing holes and
reinstall the four bolts up through the bottom of the
bearing casting.
12. Install 3/4" lock washers and 3/4" nuts (2) at the top of
each bearing mount. Tighten bolts.
3
4
2
TAB
B-17027
2
2
1 1
1
B-17031
Assembly - High Speed Compact Disc
Figure 45
1
13. With straps and approved lifting device rotate the rock
shaft up and place a support stand (1, Figure 45)
under the rockshaft tube.
14. Lower the rockshaft onto the support stand.
Installing Hitch Frame Rockshaft Spindles and
Wheels
Figure 46
3
2
1. Insert the hub / spindle (1, Figure 46) assembly into
the rockshaft tube (2).
2. Align the bolt hole and install the 3/4" x 7" bolt (3)
through the rockshaft tube and spindle.
3. Install a 3/4" lock nut on the bolt and tighten.
Repeat procedure for the LH side.
B-17028
1
B-17032
41