Setting
Flattener TOF offset
Job Canceling Timeout Period
Ribbon Queueing Position
Offset
Mag Verify
80
Printing preferences
Description
Adjusts the position of the card when the flattener roller engages.
Slower PCs can have difficulty canceling all print jobs. Increase this value if all print
jobs do not get canceled and instead some restart printing.
Fine tunes the position of the ribbon prior to printing. Adjust if printing starts in the
previous panel or goes off into the next panel.
If set to 1, enables verification of encoded mag data.
PLT-02931, Rev. A.0
September 2018