HID FARGO HDP 6600 X002200 User Manual page 95

PLT-02931, Rev. A.0
Field
SNMP Settings
SNMP v1/v2c
SNMP v3
Device
2. Make any necessary changes and click Save.
Note: You may need to confirm your administrative rights by entering a valid user name and password.
You may also need to restart the printer to save any changes. See Section 5.5.3 Changes to the
settings.
September 2018
Description
Enable or disable simple network management protocol (SNMP). Select the version you
wish to use. Available options are SNMP v1/v2c and SNMP v3. Also specify the UDP Port
Setting.
Enter the Read Community Name and the Write Community Name for the SNMP v1/v2c
setting.
Enter the Read User Name/Write User Name, Security Level, auth-password, and
priv-password for the SNMP v3 settings.
Enter the Location, Contact, Encryption Algorithm, and the Authentication Method for
this device.
Ethernet option
95