PLT-02931, Rev. A.0
Device Settings
Menu option
Color Intensity
September 2018
Description
Controls the overall darkness and lightness of the printed color.
Dye-Sub (YMC): This slider controls the overall darkness and lightness of the dye-sub printed
image. Any adjustments only affect those images printed with dye-sublimation (YMC-type)
ribbon panels.
Moving the slider to the left causes less heat to be used; the prints are lighter.
Moving the slider to the right cause more heat to be used; the prints are darker.
Resin (K): The heat is controlled for both front and back of cards. This control can be helpful
for fine-tuning the sharpness of resin text and bar codes.
This slider controls amount of heat the printer uses when printing with the resin black panel.
Moving the slider to the left causes less heat to be used; the resin images are lighter or
less saturated.
Moving the slider to the right causes more heat to be used; the resin images are darker
or more saturated.
Default: Returns the listed percentages to the factory settings.
Printing preferences
47