HID FARGO HDP 6600 X002200 User Manual page 104

Question
How do I choose a static IP address
for my printer?
What do the LEDs by the Ethernet
connection on the back of the
printer indicate?
How do I print a test page from
Windows to verify the Ethernet
configuration of the printer and
printer driver?
104
Ethernet option
Answer
Use the Network Settings page if you know the current IP address.
The printer also allows you to save the current network settings as static settings
using the printer display menu (Network Settings > TCP/IP ), and then switch
DHCP (dynamic IP address selection) to DISABLED.
Note: You can save static addresses. However, they are not used until you
reconfigure the printer to use those static addresses and reboot the printer.
The green LED indicates a valid Ethernet connection.
The amber LED indicates network activity.
This varies by the level of Microsoft Windows you are running. In general,
1. Open the Windows Settings page.
2. Select Settings > Devices > HDP6600 Card Printer > Manage > Printer
Properties.
3. Select the General tab.
4. Ensure that the printing preferences are set correctly for the ribbon
installed in your printer. Then select Print Test Page.
PLT-02931, Rev. A.0
September 2018