HID FARGO HDP 6600 X002200 User Manual page 52

Print Image
Menu option
Color Correction
Defined Areas
52
Printing preferences
Description
Use K Resin to Print Black in Images: Prints black in images using K-panel resin (white or color
backgrounds) and automatically selects Print YMC under K Resin.
Print YMC under K Resin: Clear this check box to print black in image using K-panel resin
(white or color backgrounds).
YMC Black Text (Default is K): This option prints black text with YMC instead of K.
K Resin Threshold in Images: When Use K Resin to Print Black in Images is selected, this
option sets the K resin usage limit.
Lower limit = 1
Upper limit = 255
Default: Click this button to return the listed threshold to the factory setting.
Default: Sets the optimal and most accurate color setting for this device.
Legacy: Attempts to duplicate the HDP5000 color settings.
None: Uses the uncorrected output from the printhead.
Adds and removes defined areas for K resin and color correction.
Enable Defined Area: Select the type of area to add. Each defined area is represented by the
following colors:
K Resin:
Active: Gray
Keep Out: Cyan
Color Correction:
Active: Green
Keep Out: Yellow
Set Alignment PRN: Click this button to retrieve a saved print file to verify the defined
locations on your card.
Add Area: Defines additional areas. Select K Resin or Color Correction from the drop-down
list.
PLT-02931, Rev. A.0
September 2018