HID FARGO HDP 6600 X002200 User Manual page 116

Printer Error Message
No Mag Module
Mag Verify Error
No Ecard Encoder
Headlift Error
Waiting For Data
Job Data Error
Heater Error
116
Troubleshooting
Cause
A print job with magnetic encoding
was sent with no magnetic encoder
installed in the printer.
The printer is unable to verify
encoded data.
No smart prox card encoder is
installed in the printer.
The headlift sensor is not detecting
movement from the headlift cam. This
can occur for the printhead, transfer
roller, or card flattener.
Entire print job is unable to be sent to
the printer
The transfer roller or card flattener
can not achieve correct temperature.
PLT-02931, Rev. A.0
Solution
Ensure that encoding data is not
being sent with the print job and
reprint the card.
Check the cards and click Cancel
Print on the printer display.
To cancel, click Cancel Print on the
printer display.
Reboot the printer by cycling the
power.
To cancel, press Cancel Print on the
printer display.
Verify physical connection to the
printer. To cancel, press Cancel Print
on the printer display.
To cancel, press Cancel Print on the
printer display. Reboot the printer by
cycling the power.
September 2018