Field
Font
Color
Size
3.4.5 Self tests
Provides the ability to run control feature commands resident in the firmware to exercise motors and sensors in the
printer. These tests allow you to isolate printer functions and run them to determine operational status.
Field
Poll for Sensor Status
Update Display
Polling Interval: (sec.)
70
Printing preferences
Description
Changes the font of the sample text on the card. This field is available when the Show Text
option is selected.
Changes the color of the sample text on the card. This field is available when the Show Text
option is selected.
Changes the font size of the sample text on the card. This field is available when the Show
Text option is selected.
Description
When selected, each sensor is checked at the interval specified by the Polling Interval:
(sec.) field.
When selected, the Printer Display Panel reflects what is shown on the printer display.
Sets the number of seconds to wait before each check of the printer status. Available
values are 1 to 30 seconds.
PLT-02931, Rev. A.0
September 2018