Frequently Asked Questions - HID FARGO HDP 6600 X002200 User Manual

5.7 Frequently asked questions

Question
How do I know if my printer has the
Ethernet option installed?
What PC operating systems work
with my Ethernet printer?
How do I connect my printer to my
network?
How can I find the MAC address of
my Ethernet printer?
How can I find the IP address of my
Ethernet printer?
Can I print from my PC to multiple
Ethernet printers?
Can multiple PCs print to my
Ethernet printer?
Can I print from my PC to an
Ethernet printer on a different
network segment?
102
Ethernet option
Answer
All printer models come with Ethernet installed as standard equipment.
Windows 7 (32- and 64-bit)
Windows 8 / 8.1 (32- and 64-bit)
Windows 10 (32- and 64-bit)
Windows Server 2008 R1 (32- and 64-bit)
Windows Server 2008 R2 (64-bit only)
Windows Server 2012
Windows Server 2012 R2
Windows Server 2016
You can connect from the RJ45 network connection on the back of your printer
to an available connection on your network (not directly to your PC). You can use
a good CAT-5 or better cable to make this connection.
Do one of the following:
If you know the IP address of your printer, you can see the MAC address on
the Home page of the print server.
If you do not know the IP address or the printer does not work with a
usable IP address, then the MAC address is listed in the data printed on the
"Printer Settings" self-test card.
You can find it on the printer display if the Ethernet option is functioning properly.
Select Info, then click Next several times until the IP address is shown.
Choose Local printer... unless a shared network printer is to be installed on a
print server.
Use the Windows Add Printer Wizard to create a printer instance to
communicate to the printer at the new IP address.
If the printer port is not listed as an existing port then a new Card Printer TCP/IP
Port must be created and configured to communicate to the printer at the proper
IP address.
See the appropriate Windows documentation for additional help.
Yes. Each PC must install the printer driver software for the specific
Ethernet-enabled printer and connect to the intended printer using the correct IP
address.
Yes. If you know the IP address of the printer on any segment of your network,
you will be able to print to it.
PLT-02931, Rev. A.0
September 2018