Introduction; Purpose Of The Manual; Additional Resources; Document And Software Version - Danfoss VLT AQUA Drive FC 202 Operating Manual

Introduction

1 Introduction

1.1 Purpose of the Manual

This operating guide provides information for safe instal-
lation and commissioning of the frequency converter.
The operating guide is intended for use by qualified
personnel.
Read and follow the instructions to use the frequency
converter safely and professionally, and pay particular
attention to the safety instructions and general warnings.
Always keep this operating guide available with the
frequency converter.
®
VLT is a registered trademark.

1.2 Additional Resources

Other resources are available to understand advanced
frequency converter functions and programming.
•
®
The VLT AQUA Drive FC 202 Programming Guide
provides greater detail on working with
parameters and many application examples.
•
®
The VLT AQUA Drive FC 202 Design Guide
provides detailed information about capabilities
and functionality to design motor control
systems.
•
Instructions for operation with optional
equipment.
Supplementary publications and manuals are available
from Danfoss. See drives.danfoss.com/knowledge-center/
technical-documentation/ for listings.
MG21A402
Operating Guide

1.3 Document and Software Version

This manual is regularly reviewed and updated. All
suggestions for improvement are welcome. Table 1.1 shows
the document version and the corresponding software
version.
Edition
MG21A4
Table 1.1 Document and Software Version

1.4 Product Overview

1.4.1 Intended Use
The frequency converter is an electronic motor controller
intended for:
•
•
The frequency converter can also be used for motor
overload protection.
Depending on the configuration, the frequency converter
can be used in standalone applications or form part of a
larger appliance or installation.
The frequency converter is allowed for use in residential,
industrial, and commercial environments in accordance
with local laws and standards.
NOTICE
In a residential environment, this product can cause
radio interference, in which case supplementary
mitigation measures can be required.
Foreseeable misuse
Do not use the frequency converter in applications which
are non-compliant with specified operating conditions and
environments. Ensure compliance with the conditions
specified in chapter 8 Specifications.
Danfoss A/S © 11/2016 All rights reserved.
Remarks
Software update and editorial
update
Regulation of motor speed in response to system
feedback or to remote commands from external
controllers. A power drive system consists of the
frequency converter, the motor, and the
equipment driven by the motor.
System and motor status surveillance.
1 1
Software version
2.6x
3