Establishing A Connection Between The Cx And Paired Bluetooth Device - Sokkia CX-62 Operator's Manual

PROCEDURE Displaying Bluetooth information for the CX
1. Select "Comms setup" in Config
mode.
2. Set "Wireless" to "Yes".
3. Select "My device info".
The Bluetooth information for the
CX is displayed. The "BD ADDR"
for the CX must be registered on
your Bluetooth device.

Bluetooth Device Address
This is a number unique to one particular Bluetooth device used to identify
devices during communication. This number consists of 12 characters
(numbers 0 to 9 and letters from A to F). Some devices may be referred to
by their Bluetooth device address.
10.2 Establishing a connection between the CX and
paired Bluetooth device

• Bluetooth communication causes CX battery power to be depleted at a rate
higher than that for normal operation.
• Check that the companion device (data collector, computer, or cellular phone
etc.) is turned on and the relevant Bluetooth settings are complete.
• Always set the CX to "Slave" when connecting with a data collector to perform
measurements and to record the data. When the CX is set as the "Slave"
device, the establishing of a connection can only be initiated/canceled by the
companion device set as "Master".
10. CONNECTING TO EXTERNAL DEVICES
Wireless
Bluetooth setup
Link device list
My device info
B l u e t o o t h I D :
X X X X X X X , X X X X X X X X
F i r m w a r e : X . X . X
BD_ADDR:
42
: Yes
ABCDEF012345