Table of Contents
Advertisement
5. BASIC OPERATION
5.1
Basic Key Operation
Learn basic key operations here before you read each measurement procedure.
Location of operation keys on the panel: "4.1 Parts of the Instrument"
Power ON / OFF
{ON}
{ON}
(Press and hold:
About 1 second)
Lighting up the display unit and key
{
}
Switching target type
Target type can be switched only on the screen where the target symbol (ex.
is displayed.
{SHIFT}
Target symbol displayed: "5.2 Display Functions", Switching between target
types in the Star Key mode: "5.3 Star Key Mode", Switching the target type
in Config mode": "33.2 EDM Settings"
Switching the Laser-pointer ON/OFF
{
} (Press and hold)
Selecting laser-pointer: "33.2 EDM Settings"
• After turning ON the laser-pointer, the laser beam is emitted for 5 minutes, and
then automatically switches OFF. But in the Status screen and when target
symbol (ex.
) is not displayed in the OBS mode, the laser beam is not
automatically turned off.
Power On
Power Off
Switch the screen/key backlight and Reticle il-
lumination On / Off
Switches between target types (Prism/Sheet/
N-Prism (reflectorless))
To turn the laser-pointer ON/OFF, press and
hold until a beep sounds.
17
)
Advertisement
Table of Contents
