Standard Equipment And Optional Accessories; Standard Equipment; Optional Accessories - Sokkia CX-101 Service Manual

36. STANDARD EQUIPMENT AND OPTIONAL ACCESSORIES

36.1 Standard equipment

When you use this instrument for the first time, ensure that there are no missing
equipments.

"List of standard components" (separate sheet)

36.2 Optional accessories

The following are optional accessories which are sold separately from the CX.

Target and power supply optional accessories: "36.3 Target system" and
"36.4 Power supplies".
Plumb bob

The plumb bob can be used to set up
and center the instrument on days
when there is little wind. To use the
plumb bob, unwind its cord, pass it
through the cord grip piece as shown
in the figure to adjust its length, then
suspend it from the hook attached to
the centering screw.
Tubular compass (CP7)

Slide the tubular compass into the
tubular compass slot, loosen the
clamp screw, then rotate the top part
of the instrument until the compass
needle bisects the index lines. The
telescope's face left sighting
direction in this position will indicate
magnetic north. After use, tighten the
clamp and remove the compass from
the slot.

The tubular compass is susceptible to the influence of nearby magnets or metal.
Such influence could cause it to fail to accurately indicate magnetic north. Do not
use magnetic north as indicated by this compass for base line surveying.
286
Tubular
compass
slot