Table of Contents
Advertisement
11.2
Focussing a n d t a r g e t sighting
11.2 Focussing and target sighting
Focus on the reticle
1) Look through the telescope eye-
piece @ at a bright and feature-
less background.
2) Turn the eyepiece clockwise, then
counterclockwise
little by little
until just before the reticle image
goes out of focus.
Using this procedure, frequent
reticle refocussing i s not necessary,
since your eye is focussed at in-
finity.
(sight the target)
3)
Loosen the vertical
@
and hori-
L~ne the target with
the white arrow ~n
zontai
@
clamps, and use the
the peep stght
peep sight
@
to bring the target
into the field of view.
4) Tighten both clamps.
5 ) Turn the focussing ring
@
t o fo-
cus o n the target.
6) Turn thevertical
and horizontal
@
fine motion screws t o align the
target object with the reticle.
The last adjustment of each fine
motion screw should be in the
clockwise direction.
Advertisement
Table of Contents
