Allen-Bradley PowerFlex 20-COMM-P FRN 1 Series User Manual page 43

21. Click Add to continue adding modules. Select "Parameter Access"
and click OK.
Figure 4.22 Add Modules: Parameter Access Selection Window
22. The "Parameter Access" module has now been added as shown in
Figure 4.23.
Figure 4.23 Modules: Parameter Access Viewing Window
Settings can be chosen to map Station modules to SLC addresses. In our
example M1/M0 files are used for Input / Output.
Note that the Reference/Feedback (Ctrl/Stat & Ref/Fdbk) start at word 0.
Configuring the Profibus Scanner 4-13