Table of Contents
Advertisement
Configuring the Adapter
Chapter 3 provides instructions and information for setting the
parameters in the adapter.
Topic
Configuration Tools
Using the PowerFlex HIM
Setting the Node Address
Setting the I/O Configuration
For a complete list of parameters, refer to
Parameters. For definitions of terms in this chapter, refer to the Glossary.
Configuration Tools
The PROFIBUS adapter stores parameters and other information in its
own non-volatile memory. You must, therefore, access the adapter to
view and edit its parameters. The following tools can be used to access
the adapter parameters:
Tool
DriveExplorer Software (version 2.01
or higher)
DriveExecutive Software (version 1.01
or higher)
PowerFlex HIM
Page
Topic
3-1
Setting a Fault Action
3-2
Resetting the Adapter
3-3
Viewing the Adapter Configuration
3-3
Appendix
Refer To:
DriveExplorer Getting Results Manual ,
Publication 9306-5.3, or the online help
DriveExecutive Online Help
page
3-2
Chapter
Page
3-4
3-6
3-7
B,
Adapter
3
Advertisement
Table of Contents
Need help?
Do you have a question about the PowerFlex 20-COMM-P FRN 1 Series and is the answer not in the manual?
Questions and answers