Canon iR6570 Series Portable Manual page 205

Sub-item Description
ERR Use it to reset an error code.
(codes: E000, E001, E002, E003, E004, E005)
Procedure
1) Select the item, and press the OK key.
2) Turn off and then on the main power.
DC-CON Use it to initialize the RAM on the DC controller PCB.
The RAM will be initialized when the main power switch is turned
off and then back on.
Procedure
1) Print out the service mode particulars using the following:
COPIER>FUNCTION>MISC-P>P-PRINT.
2) Select the item, and press the OK key.
3) Turn off and then on the main power switch.
4) As necessary, enter the data you have printed using P-PRINT.
R-CON Use it to initialize the RAM on the reader controller PCB.
The settings will be initialized when you turn off and then on the
main power switch.
Procedure
1) Print out the service mode particulars using the following:
COPIER>FUNCTION>MISC-P>P-PRINT.
2) Select the item, and press the OK key.
3) Turn off and then back on the main power.
4) As necessary, enter the data you have printed using P-PRINT.
JAM-HIST Use it to reset the jam history.
The jam history will be reset when the OK key is pressed.
Procedure
1) Select the item, and press the OK key.
ERR-HIST Use it to reset the error code history.
The error code will be reset when the OK key is pressed.
1) Select the item, and press the OK key.
PWD-CLR Use it to reset the password of the system administrator.
The password of 'system administrator' set in user mode is reset
when the OK key is pressed.
Procedure
1) Select the item, and press the OK key.
ADRS-BK Clearing the address book.
The address book is cleared when the main power switch is turned
OFF and ON.
T-5-45
COPIER > FUNCTION > CLEAR
Level
1
1
1
1
1
1
1