Image Adjustments; 1Standards Of Image Position; Standards Of Image Position; 2Checking The Image Position - Canon iR6570 Series Portable Manual

2.2 Image Adjustments

2.2.1 Standards of Image
Position
iR5570 / iR6570
The image margin/non-image width of a print made in
direct must be as follows:
mage Leading Edge Margin
F-2-17
Left/Right Image Margin
2.5 1.5mm
0
2
4
6
8
10
F-2-18
Leading Edge Non-Image Width
F-2-19
Left/Right Non-Image Width
2.5 1.5mm
0
2
4
6
8
10
F-2-20
0008-7917
1.5mm
4.0
1.0mm
1.5mm
4.0
1.0mm
2.2.2 Checking the Image
Position
iR5570 / iR6570
Make prints using the following as the source of paper
(10 prints each), and check to see that the image
margin and the non-image width are as indicated:
- Each cassette
- Front deck (left, right)
- Manual feed tray
- Duplex feeding unit
- Side paper deck
If not as indicated, adjust the image position in the
following order:
1. Adjusting the left/right image margin (registration)
2. Adjusting the image leading edge margin
(registration)
3. Adjusting the left/right non-image width (CCD read
start position)
4. Leading edge non-image width (scanner image
leading edge position)
2.2.3 Adjusting
Registration
iR5570 / iR6570
<Cassette 3/4>
1) Press the release button to draw out the cassette 3/4.
2) Loosen the 2 fixing screws [1] on both sides of the
cassette.
3) Move the cassette body frontward or backward to
adjust.
Backward: The side registration value (left margin)
is decreased.
Frontward: The side registration value (left margin)
is increased.
Chapter 2
0008-7918
Side
0009-4593
2-23