Adjust (Adjustment Mode); Copier; Copier List - Canon iR6570 Series Portable Manual

5.3 ADJUST (Adjustment Mode)

5.3.1 COPIER

5.3.1.1 COPIER List

iR5570 / iR6570
<AE>
Sub-item
AE-TBL
<ADJ-XY>
Sub-item
Use it to adjust the image read start position.
- If you have initialized the RAM on the reader controller PCB or replaced the PCB, enter the value
indicated on the service label.
- If you have changed the setting of this item, record the new setting on the service label.
ADJ-X
ADJ-Y
ADJ-S
ADJ-Y-DF
T-5-16
COPIER > ADJUST > AE
Description
adjustment range: 1 to 9 (default: 5)
- to obtain darker characters, increase the setting.
- to obtain lighter characters, decrease the setting.
If you have initialized the RAM on the reader controller PCB,
enter the value indicated on the service label.
T-5-17
COPIER > ADJUST > ADJ-XY
Description
Use it to adjust the image read start position (X direction).
adjustment range: 1 to 100 (default: 20)
Use it to adjust the image read start position (Y direction).
adjustment range: 47 to 131 (default: 90)
Use it to adjust the point at which data is collected for shading
using the standard white plate.
adjustment range: 20 to 200 (default: 50)
Use it to adjust the main scanning position for feeder mode.
adjustment range: 21 to 106 (default: 53)
Chapter 5
0009-6069
Level
1
Level
1
1
1
1
5-37