Canon iR6570 Series Portable Manual page 223

Sub-item Description
U-NAME Use it to set user names permitting connection to the SSH server.
setting
8 characters max. (alphanumeric)
U-PASWD Use it to set user passwords permitting connection to the SSH
server.
setting
8 characters max. (alphanumeric)
DA-PORT Use it to enable/disable the port for TOT asynchronous status
communication.
setting
0: close (default)
1: open (w/ DA installed)
DA-CNCT Use it to set the DA.
setting
0: off (default)
1: on
CHNG-STS Use it to set the TOT status connection port number.
setting
1 to 65535 (default: 20010)
CHNG-CMD Use it to set the TOT command connection port number.
setting
1 to 65535 (default: 20000)
MEAP-DSP Use it to enable/disable a shift from the MEAP to native screen.
setting
0: off (shift to native seen; default)
1: on (do not shift to native screen)
ANIM-SW Use it to enable/disable display of the Error/Jam screen with a
MEAP application in operation.
setting
0: off (display warning screen; default)
1: on (do not display warning screen)
MEAP-SSL Use it to set the HTTPS port for MEAP.
setting
0 to 65535 (default: 8443)
STNBY-TM Use it to switch over the standby shift time.
setting
0: normal (default)
1: increase standby shift time until possibility of image distortion
is absent
KSIZE-SW for future use
COPIER > OPTION > BODY
Level
2
2
2
2
2
2
2
2
2
2
2