Canon iR6570 Series Portable Manual page 216

Sub-item Description
SC-L-CNT Use it to change the threshold level of the paper size (large/small)
for the scan counter.
setting
0: count B4 as small size (default)
1: count B4 as large size
DHON-TM Use it to set the timing at which drum heater goes on in sleep
mode (with reference to clock time).
setting: 0 to 24 (default: 0: in hr)
DHON-IVL Use it to set the timing at which the drum heater goes on in sleep
mode (with reference to time after a shift to sleep mode).
setting: 0, 15 to 1440 (default: 0; in min)
DHOF-TM Use it to set the timing at which the drum heater goes off in sleep
mode (with reference to clock time).
setting: 0 to 24 (default: 01; in hr)
DHOF-IVL Use it to set the timing at which the drum heater goes off in sleep
mode (with reference to clock time).
setting: 0, 15 to 1440 (default: 0; in min)
CBLTINVL Use it to change the number of times the fixing web solenoid goes
on.
Make use of it when image faults occur as the result of soiling on
the pressure roller.
Setting
0: normal (default)
1: twice normal
PO-CNTMD Use it to select the number of times the potential control
mechanism goes on.
0: once at power-on
1: once at power-on and, in addition, 10 and 60 min thereafter
(simplified potential control mode)
2: once at power-on and, in addition, 10 and 60 min thereafter
(normal potential control mode; default)
W-CLN-P Use it to set the interval at which the primary charging wire is
automatically cleaned.
setting: every 100 to 2000 (sheets; default at 2000)
COPIER > OPTION > BODY
Level
1
1
1
1
1
1
2
2