Canon iR6570 Series Portable Manual page 214

Sub-item Description
CONFIG Use it to select multiple firmware items stored on the hard disk
and switchover country, language, machine type, and paper size
configuration.
Procedure
XXYYZZ
XX: country (JP); YY: language (ja); ZZ (00): machine type; AA
(00): paper size configuration. The indications will be in keeping
with the following: COPIER>DISPLAY>USER>LANGUAGE.
(The notations in parentheses indicate defaults. The country and
language notations are for indication only.)
1) Select <CONFIG>.
2) Select the appropriate item to highlight, and press the +/- key.
3) See that each press on the +/- key changes the selections in
sequence.
4) When you have made all selections, press the OK key.
5) Turn off and then on the main power switch.
TR_SP_C1 Use it to change the transfer/separation output settings when the
right deck is used as the source of paper by way of providing a
remedial measure.
Setting
0: normal (default); 1: double transfer; 2: separation fault; 3:
transfer fault
TR_SP_C2 Use it to change the transfer/separation output setting when the
left deck is used as the source of paper by way of providing a
remedial measure.
Setting
0: normal (default); 1: double transfer; 2: separation fault; 3:
transfer fault
TR_SP_C3 Use it to change the transfer/separation output setting when the
cassette 3 is used as the source of paper by way of providing a
remedial measure.
0: normal (default); 1: double transfer; 2: separation fault; 3:
transfer fault
TR_SP_C4 Use it to change the transfer/separation output setting when the
cassette 4 is used as the source of paper by way of providing a
remedial measure.
0: normal (default); 1: double transfer; 2: separation fault; 3:
transfer fault
COPIER > OPTION > BODY
Level
1
1
1
1
1