Canon iR6570 Series Portable Manual page 191

Sub-item
TR-N1
TR-N2
PRE-TR
HVT-TR
H-PRE-TR
D-PRE-TR
D-HV-TR
<HV-SP>
Sub-item
SP-N1
SP-N2
T-5-25
COPIER > ADJUST > HV-TR
Description
Use it to adjust the output level of the 1st side of plain paper for an
N/N environment.
adjustment range: 100 to 400 (default: 380)
Use it to adjust the output level of the 2nd side for an N/N
environment.
adjustment range: 100 to 400 (default: 310)
Use it to adjust the current level of the pre-transfer charging
assembly.
adjustment range: -300 to 0 (default: 220)
Use it to enter the transfer charging assembly high-voltage offset
value for the high-voltage unit.
adjustment range: -100 to 100 (default: 0)
Use it to enter the pre-transfer charging assembly high-voltage
offset value for the high-voltage unit.
adjustment range: -100 to 100 (default: 0)
Use it to enter the pre-transfer charging assembly high-voltage
offset value for the DC controller PCB.
adjustment range: -50 to 50 (default: 0)
Use it to enter the transfer charging assembly high-voltage offset
value for the DC controller PCB.
adjustment range: -50 to 50 (default: 0)
T-5-26
COPIER > ADJUST > HV-SP
Description
Use it to adjust the output level for the 1st side of plain paper
for an N/N environment.
adjustment range: -500 to 100 (default: -190)
Use it to adjust the output level for the 2nd side of plain paper
for an N/N environment.
adjustment range: -500 to 100 (default: -170)
Chapter 5
Level
1
1
1
1
1
1
1
Level
1
1
5-41