Canon iR6570 Series Portable Manual page 115

Hide thumbs Also See for iR6570 Series:
Table of Contents

Advertisement

Cause
The original to be transmitted is not placed
properly.
# 012
The target is out of recording paper, and
transmission has failed.
# 018
There is no response to a redial attempt.
The target is engaged for a different
communication, and transmission has failed.
The settings do not match the settings of the
target, and the transmission has failed.
# 022
The particulars of the group address selected as
the forwarding target may have been deleted, or
there is no more than a user box, thus causing
the transmission to fail.
The attempt to transmit to an address registered
in the address book has failed because the
address has been removed from the address
table while in wait for transmission.
# 037
There is a shortage of memory, not permitting
reception.
# 080
F code is not set on the target.
# 081
The appropriate password is not set on the
target.
# 099
The transmission has been suspended in the
middle.
# 102
There is a mismatch of F code or password.
# 107
Remedy
Start over from the beginning.
Ask the target to supply recording paper.
Check to make sure that the target is ready for
communication; then, try once again.
Check to make sure that the target is ready for
communication; then, try once again.
Check to make sure that the target is ready for
communication; then, try once again.
Try transmitting once again.
Try once again.
Remove error files and unnecessary files to
increase available memory.
Check the F code of the target, and start over.
Check the password of the target, and start
over.
Start over.
Check the F code and the password of the
target, and start over.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ir5570 series

Table of Contents