Canon iR6570 Series Portable Manual page 100

Code Description
0002 [Cause] start-up file absent: the main CPU
program does not exist on the HD (/
BOOTDEV/BOOT/and lower).
[Description] at time of Bootrom
processing, when the system files are
being loaded (usrIde).
[Timing] once at start-up
0003 [Cause] HD write abort error: /BOOTDEV
sector on the HD cannot be read.
[Description] BARSAC (all areas at
Bootable start-up)
[Timing] once at start-up
0006 [Cause] SubBootable compatible with the
PDL type does not exist in /BOOTDEV/
BOOT.
[Description] when SubBoot in oclibroot
is being loaded
[Timing] once at start-up of Bootable
0007 [Cause] ICC-Profile compatible with the
PDL type does not exist in /BOOTDEV/
PDL.
[Description] beginning of oclibroot; the
PDL team function is called and
determined
[Timing] once at start-up of Bootable
01XX /DOSDEV is faulty.
02XX /FSTDEV is faulty.
03XX /DOSDEV2 is faulty.
04XX /FSTPDEV is faulty.
05XX /DOSDEV3 is faulty.
06XX /PDLDEV is faulty.
07XX /DOSDEV4 is faulty.
08XX /BOOTDEV is faulty.
09XX /DOSDEV5 is faulty.
FFXX There is an error in a partition that cannot
be identified.
E604 The image memory is faulty or inadequate.
0000 The memory is inadequate for the model.
E609 The hard disk is faulty.
Remedy
- See details for E602.
- See details for E602.
- See details for E602.
- See details for E602.
- See details for E602.
- See details for E602.
- See details for E602.
- See details for E602.
- See details for E602.
- See details for E602.
- See details for E602.
- See details for E602.
- See details for E602.
- See details for E602.
- Add memory.