Canon iR6570 Series Portable Manual page 244

Chapter 5
Sub-item
DK-P
CCV2CT
CCV-LSZ
CC-SPSW
<INT-FACE>
Sub-item
IMG-CONT
AP-OPT
5-94
COPIER > OPTION > ACC
Description
Use it to set the size of paper used in the side paper deck.
setting
0: A4 (default)
1: B5
2: LTR
Use it to enable/disable large 2 count control.
0: off (disable 2-count control; default)
1: on (enable 2-count control; count pulse width/pulse width, 100
msec)
2: on (enable 2-count control; count pulse width/pulse width, 30
msec)
Use it to set a threshold for small/large size identification used in
large 2 count mode.
setting: 0 to 458 (default: 364; in mm)
Use it to set control card I/F support.
0: do not support (default)
1: support
T-5-56
COPIER > OPTION > INT-FACE
Description
Use it to set the connection of the EFI controller.
setting
0: no controller
1: EFI model (PINATUBO, Mt. Hood)
2: T/R, AHT model
3: EFI external controller present (Yukon/Pinatubo V2.0)
4: EFI external controller present (Meru V3.1)
Use it to permit/not permit printing from application PrintMe
built into the PS print server unit.
setting
0: permit printing using unspecific ID (default)
1: permit printing using specific account
2: reject printing
Level
1
1
1
2
Level
1
2